Cold application type LT-430 flame resistance optical fiber filling gel
- Product model：Type LT-430
- Product Features：Flame resistance property; excellent colloid stability and oxidation stability; heat resistance; weather ability; non- oil separation; small acid value; good compatibility with all optical material
- Applications：Apply to optical fiber in special environment
- Technical Requirements：
Product Introduction
Product introduction：The type of product is designed for optical fiber in special environment.
Technical parameters:
Cold application type LT-430 flame resistance optical fiber filling gel technical specification
1、general technical requirements
Filling gel is needed to be homogeneous, hydrogen absorption, and does not include any dust, metal particles, and other impurities. It should be no sight visible air bubbles, and the mold should be no nutrition. Filling gel should be non-toxic, no stimulation to the skin.
2、main technical parameters
|
Serical number |
items |
Unit |
Index |
Experimental method |
|
1 |
appearance |
|
Homogeneous, no impurities |
Visual inspection |
|
2 |
Dropping point |
℃ |
≥200 |
YD／T839.1- 3.4.1 |
|
3 |
density（20℃） |
g／cm2 |
0.87±0.03 |
YD／T839.1- 3.15 |
|
4 |
Cone penetration 25℃ －40℃ |
1／10mm 1／10mm |
435±30 ≥230 |
YD／T839.1- 3.4.2 |
|
5 |
Color stability（130℃、120h） |
|
≤2.5 |
YD／T839.1- 3.3.1 |
|
6 |
Oxidation induction time （190℃） |
min |
≥30 |
YD／T839.1- 3.3.2 |
|
7 |
Flashing point |
℃ |
＞300 |
YD／T839.1- 3.4.3 |
|
8 |
Burnable temperature index |
℃ |
≥300 |
NES 715 |
|
9 |
Hydrogen evolution （80℃、24h） |
μl／g |
≤0.03 |
YD／T839.1- Appendix G |
|
10 |
Oil perspiring（80℃、24h） |
% |
≤0.5 |
YD／T839.1- Appendix A |
|
11 |
Evaporation capacity （80℃、24h） |
% |
≤0.5 |
YD／T839.1- Appendix A |
|
12 |
Water resistance（20℃、7d） |
|
Non-disassembly |
YD／T839.1- 3.8 |
|
13 |
Acid value |
mgK0H／g |
≤0.3 |
YD／T839.1- 3.2 |
|
14 |
Water content |
% |
≤0.01 |
YD／T839.1- 3.9 |
|
15 |
mpa.s |
8000±1000 |
YD／T839.1- 3.4.4 |
|
|
16 |
compatibility：
A、with optical fiber, optical fiber coating materials （85℃、30×24h）
B、with pine casing material（85℃、30×24h）
variation in tensile strength elongation at break mass variation
C、Composite metal band （68℃、7×24h） Steel-plastic composite tape、Aluminum plastic compound tape |
% % % |
No color fading, No migration, no delamination, no cracking Maximum release force 1.0N～8.9N Average value 1.0N～5.0N
no delamination no cracking
≤25 ≤30 ≤3
no delamination no cracking |
YD／T839.1- Appendix D YD／T839.1- Appendix F
YD／T839.1- Appendix E
YD／T839.1- Appendix E YD／T839.1- Appendix E YD／T839.1- Appendix E
YD／T839.1-3.7-C |
|
17 |
corrosive（80℃、14×24h） with copper, aluminum, steel |
|
No corrosion points |
YD／T839.1-3.5 |
3、Environmental performance requirements
|
Type |
matter |
Prohibitive content（mg/kg） |
|
Heavy metal |
plumbic |
≤1000 |
|
cadmium |
≤100 |
|
|
mercury |
≤1000 |
|
|
Hexavalent chromium |
≤1000 |
|
|
Organic Bromide |
Polybrominated biphenyls（PBB） |
≤1000 |
|
Polybrominated diphenyl ethers（PBDE） |
≤1000 |
