Hot application type LTD-90 electric cable filling gel
- Product model：type LTD-90
- Product Features：hot melting electric cable filling gel; excellent high and low temperature property, excellent electric property and dielectric property
- Applications：Apply to warming filling into gaps of multi conductors wire and cable cores, or gaps between any constructions of cable components, to avoid water or any liquid flow into cables; provides excellent functions of insulation, waterproof, damp-proof and buffe
- Technical Requirements：
Product Introduction
It is a type of hot melting electric filling gel, which refining low-temperature high-purity mineral oil, hydrogenated white oil and thickener as main material to combine by advanced technique. It designed for excellent high and low temperature property, excellent electric property and dielectric property
hot application type LTD-90 electric cable filling gel technical specification
Filling gel is needed to be homogeneous, water repellency, and does not include any dust, metal particles, and other impurities. It should be no nutrition. Filling gel should be non-toxic, no stimulation to the skin.
|
Serical number |
items |
Unit |
Index |
Experimental method |
||||
|
1 |
appearance |
|
Homogeneous, no impurities |
Visual inspection |
||||
|
2 |
Dropping point |
℃ |
100±10 |
YD／T839.1- 3.4.1 |
||||
|
3 |
density（20℃） |
g／cm2 |
0.86±0.02 |
YD／T839.1- 3.15 |
||||
|
4 |
Cone penetration 25℃ －40℃ |
1／10mm |
≥50 |
YD／T839.1- 3.4.2 |
||||
|
5 |
Oxidation induction time （190℃） |
min |
≥20 |
YD／T839.1- 3.3.2 |
||||
|
6 |
Flashing point |
℃ |
≥200 |
YD／T839.1- 3.4.3 |
||||
|
7 |
Oil perspiring（50℃、24h） |
mm |
≤3 |
YD／T839.1- 3.4.5 |
||||
|
8 |
Water-resistance（20℃、7d） |
|
No disassembly |
YD／T839.1- 3.8 |
||||
|
9 |
Acid value |
mgK0H／g |
≤0.5 |
YD／T839.1- 3. 2 |
||||
|
10 |
Cold shortness（－10℃、1h） |
F |
≤2／10 |
YD／T839.1- 3.4.8 |
||||
|
11 |
Engler viscosity（120℃） |
E |
≥10 |
YD／T839.1- 3.4.4 |
||||
|
12 |
dielectric（23℃） |
|
≤2.30 |
YD／T839.1- 3.6.1 |
||||
|
13 |
Dielectric loss factor（23℃、1MHz） |
|
≤1.0×10-3 |
YD／T839.1- 3.6.1 |
||||
|
14 |
Volume resistivity（23℃） |
Ω.cm |
≥1.0×1013 |
YD／T839.1-3.6.2 |
||||
|
15 |
compatibility： A、with sheathing materials （80℃、28×24h） variation in tensile strength elongation at break mass variation
B、Composite metal band （68℃、7×24h） Steel-plastic composite tape、Aluminum plastic compound tape |
% % %
|
≤25 ≤25 ≤15
No blistering、 No separation |
YD／T839.1- Appendix C YD／T839.1- Appendix C YD／T839.1- Appendix C
YD／T839.1-3.7-C |
||||
|
16 |
corrosive（80℃、14×24h） with copper, aluminum, steel |
|
No corrosion points |
YD／T839.1-3.5 |
||||
|
Type |
matter |
Prohibitive content（mg/kg） |
|
Heavy metal |
plumbic |
≤1000 |
|
cadmium |
≤100 |
|
|
mercury |
≤1000 |
|
|
Hexavalent chromium |
≤1000 |
|
|
Organic Bromide |
Polybrominated biphenyls（PBB） |
≤1000 |
|
Polybrominated diphenyl ethers（PBDE） |
≤1000 |
